Canon ImageFormula R10 User Manual

Also see for ImageFormula R10: Setup guide Installation guide

36Scan PanelScan PanelScan Panel is software for controlling scanning operations such as feedingdocuments and stopping scanning when scanning multiple documentsone after the other.Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or[Automatic Feeding] in the advanced settings dialog box. In this case, theScan Panel appears when you are not scanning and the scanner entersthe wait state.If you place the next document and then click the Start button in ScanPanel, scanning of the placed document starts.You can stop scanning part way through by clicking the [STOP] button ofScan Panel.If you click [More] in the advanced settings dialog box and then set[Feeding Option] to [Panel-Feeding] or [Automatic Feeding] in the dialogbox which appears, Scan Panel appears when the scanner starts.When scanning of the first document finishes, Scan Panel appears andthe scanner enters the wait state. If you place the next document and thenclick [Continue scanning], scanning of the placed document starts.You can stop scanning part way through by clicking [Finish].Setting Basic Scanning ConditionsThis section provides an overview of the basic setting items that arethe minimum requirements when configuring the scanner settings.Confirming Basic Conditions for ScanningWhen you scan a document, make sure you confirm the [Color mode],[Page Size], [Dots per inch], and [Scanning Side] basic conditions in theBasic tab.