Canon ImagePROGRAF iPF680 User Manual

Also see for ImagePROGRAF iPF680: User guide User guide Service guide User guide

Email Notification When Printing is Finished or Errors OccurEmail Notification When Printing is Finished or Errors OccurThe printer can notify you of the printer status by email. Even when you are away from the printer, you can know whenprinting is finished or if errors occur. Receive notification via email on your mobile phone or at your computer.Use the imagePROGRAF Status Monitor (Windows) function to set up email recipients and message timing. Besidesbeing informed of finished print jobs or errors, you can also complete settings for email notification when service is nee-ded or it's time to replace consumables. For detailed instructions,see "Specifying Printer-Related Information." ➔P.497Note• For details on email notification using imagePROGRAF Status Monitor (in Windows), refer to the imagePROGRAFStatus Monitor help.• Mail server authentication is only supported with imagePROGRAF Status Monitor.Initializing the Network SettingsInitializing the Network SettingsUse RemoteUI to restore the network settings to the default values as follows.Important• Initializing the network settings will also restore the default value of the printer's IP address. As a result, the RemoteUIpage cannot be displayed in the web browser after this procedure.• For instructions on reconfiguring the IP address, see "Configuring the IP Address on the Printer." ➔ P.488• For details on RemoteUI, see "Using RemoteUI." ➔ P.4861 Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUIpage.http://printer IP address or name/Example: http://xxx.xxx.xxx.xxx/2 Select Administrator Mode and click Logon.Note• If a password has been set on the printer, enter the password.3 Click Network in the Device Manager menu at left to display the Network page.4 Click Reset to Default settings in the lower-right corner of the Network Interface group.5 After confirming the message, click OK to restore the network settings to the default values.Note• You can also use imagePROGRAF Device Setup Utility or the Control Panel to restore the default network settings.iPF680 Email Notification When Printing is Finished or Errors OccurUser's GuideNetwork Setting Other Settings499