Canon ImagePROGRAF iPF680 User Manual

Also see for ImagePROGRAF iPF680: User guide User guide Service guide User guide

Roll printing is selected, but sheets are loaded.Roll printing is selected, but sheets are loaded.Cause Corrective ActionA print job for rolls was received when asheet is loaded.Follow these steps to load and print on a roll.1. Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.(See "Removing Sheets.") ➔ P.3972. Load a new roll.(See "Loading Rolls in the Printer.") ➔ P.373The printer now starts printing the print job.Press ▲ or ▼ to select Stop Printing, and then press the OK button.The roll is empty.The roll is empty.Cause Corrective ActionThe roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size.1. Press the Release Lever back and remove the roll.(See "Removing the Roll from the Printer.") ➔ P.378(See "Removing the Roll Holder from Rolls.") ➔ P.3812. Load the new roll.(See "Attaching the Roll Holder to Rolls.") ➔ P.370(See "Loading Rolls in the Printer.") ➔ P.3733. If no barcode was printed on the roll, specify the type of paper.(See "Changing the Type of Paper.") ➔ P.3764. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed onthe roll, also specify the paper length.(See "Specifying the Paper Length.") ➔ P.3785. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OKbutton.Printing will resume, starting from the page on which the error occurred.If no message appears, printing will continue from the next page.There is remainingroll paper, but be-cause it could notbe advanced, itcould not be detec-ted.The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change theprinting mode, which will change the paper feed timing.Choose a higher level of Print Quality in the Advanced Settings of the printer driver.(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") ➔ P.58Sheet printing is selected.Sheet printing is selected.Cause Corrective ActionYou have attempted to print on a sheet, butno sheet is loaded.Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet, andthen print.(See "Loading and Printing on Sheets.") ➔ P.21Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.Regular printing is selected, but a roll is loaded.Regular printing is selected, but a roll is loaded.Cause Corrective ActionA print job for printing on sheetswas sent when a roll is loaded.1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.2. After removing the roll, load and print on a sheet of the type and size of paper you have specifiedin the printer driver.(See "Removing the Roll from the Printer.") ➔ P.378(See "Loading and Printing on Sheets.") ➔ P.21Roll printing is selected, but sheets are loaded. iPF680User's GuideError Message Messages regarding paper614