Canon LEGRIA HF G40 Instruction Manual

Contents

Appendix: Menu Options Lists150* The default settings are as follows. [Assign Button 1]: [ AF/MF], [Assign Button 2]: [z PRE REC],[Assign Button 3]: [j Off], [Assign Button 4]: [j Off], [Assign Button 5]: [ Rec Review].** Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.[OLED/VF Brightness]: Sets the OLED screen and viewfinder to one of two brightness levels. You canuse this to make the screen brighter when recording in bright places, for example.[OLED Dimmer]: When set to on, the illumination sensor will detect the surrounding brightness and thecamcorder will automatically adjust the screen's brightness accordingly. When you need to carefullymonitor picture quality when recording, keep this setting set to off.• Changing the brightness of the screen does not affect the brightness of your recordings or thebrightness of the playback image on a TV.• Using the [ Bright] setting will shorten the effective usage time of the battery pack.• When [Demo Mode] is set to [i On] and the camcorder is being powered using the compactpower adapter, this setting will automatically change to [ Bright].• When [OLED Dimmer] is set to on, the camcorder's screen will automatically become dimmer if thecamcorder is left without any operation for 3 minutes. Operate any control on the camcorder toreturn the screen to its previous setting.[OLED Mirror Image]: When set to [i On], this function reverses the image on the screen horizontallywhen you rotate the OLED panel 180 degrees toward the subject. In other words, the screen will showa mirror image of the subject.[OLED Color Balance]: Allows you to adjust the color balance of the OLED screen. Adjust the [B] (blue)and [R] (red) bars by touching [+] and [-]. You can check the results on the screen.[Notification Sounds]: A beep will accompany some of the camcorder's operations.• While pre-recording (A 89) is activated, the camcorder will not emit any notification sounds.[Wireless Remote Control]: Allows the camcorder to be operated with the wireless controller.[Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS](A 60).[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.[Set WB Priority]: You can press an assignable button set to [Ä WB Priority] to switch between thecurrent white balance and the white balance setting selected for [Set WB Priority].[[Focus Ring Direction]: Changes the direction the focus/zoom ring needs to be turned. This settingaffects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch isset to FOCUS).[Focus Ring Response]: Selects the sensitivity of the response when operating the focus/zoom ring.This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoomring switch is set to FOCUS).[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.[Reset All] [No], [Yes] z z z –Menu item Setting options Ay }