Playing Back Video98During playback pause:Displaying scene information1 In either the AVCHD or MP4 movie index screen, touch [I].2 Touch the desired scene.• The scene information screen appears.• If the optional GP-E2 Receiver was attached to the camcorder during recording, GPS informationwill also appear.• Touch Ï/Ð to select the previous/next scene.3 Touch [K] twice when finished.IMPORTANT• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do somay result in permanent data loss.- Do not open the double memory card slot cover.- Do not disconnect the power source or turn off the camcorder.- Do not change the camcorder’s operating mode.• You may not be able to play back with this camcorder movies recorded on a memory card usinganother device.NOTES• You can turn off the recording date and time display or change the information displayed with thes > [Data Code] setting.• Depending on the recording conditions, you may notice brief stops in video or sound playbackbetween scenes.• During fast/slow playback, you may notice some anomalies (blocky video artifacts, banding, etc.) inthe playback picture.• The speed indicated on the screen is approximate.• Slow reverse playback will look the same as continuous frame reverse.! Resume playback." Slow playback* backward/forward.# Capture the displayed frame as a photo (A 99).* Touch several times to increase the playback speed 1/8 → 1/4 the normal speed.
