Canon LEGRIA HF G40 Instruction Manual

Contents

Troubleshooting162Cannot record movies on this memory card- Movies cannot be recorded on a 64 MB or smaller memory card. Use a recommended memorycard (A 32).Cannot trim the scene- MP4 movies that were copied to a memory card with a larger cluster size than the memory cardthey were recorded on cannot be trimmed.- MP4 movies that were recorded or copied using other devices cannot be trimmed.Charge the battery pack- Battery pack is exhausted. Charge the battery pack.Check the memory card- Cannot access the memory card. Check the memory card and make sure it is insertedcorrectly.- A memory card error occurred. The camcorder cannot record or display the image. Tryremoving and reinserting the memory card, or use a different memory card.- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card(A 32).- If after the message disappears, 6/7 appears in red, perform the following: Turn off thecamcorder and remove and reinsert the memory card. If 6/7 turns back to green you canresume recording/playback. If the problem persists, save your recordings (A 110) andinitialize the memory card (A 33).Do not disconnect the power source. Do not disconnect the USB cable unless you first usethe computer to safely end the connection.- When the camcorder is in mode and is connected to the computer with the supplied USBcable, the camcorder cannot be operated. Disconnecting the USB cable or power source whilethis message appears may result in permanent loss of the recordings on the memory card. Usethe computer's Safely Remove Hardware function to end the connection and disconnect theUSB cable before using the camcorder.File name error- The folder and file numbers have reached their maximum value. Set > [File Numbering]to [Reset] and delete all the MP4 movies (A 100) and photos (A 109) on the memory card orinitialize it (A 33).Initialize only using the camcorder- Initialize the memory card with this camcorder (A 33).May not be possible to record movies on this memory card- You may not be able to record movies on a memory card without a Speed Class rating or ratedSD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or 10.Mem. Card Number of scenes already at maximum- The memory card already contains 3,999 scenes (the maximum number of scenes for AVCHDmovies); no further scenes can be copied onto the memory card. Delete some scenes (A 100)to free some space.Mem. Card Unable to recognize the data- The memory card contains scenes recorded using a video configuration that is not supported(NTSC). Play back the recordings in the memory card with the device originally used to recordthem.Memory card A/B writing error Attempt to recover the data? (Can take up to 3 min.)- This message will appear the next time you turn on the camcorder if power supply wasaccidentally interrupted while the camcorder was writing to the memory card. Select [Recover]to try to recover the recordings. If you inserted a memory card that contains scenes recordedusing another device, we recommend that you select [No].