External Connections 131Connecting to the Computer and Uploading your Videos1 Connect the camcorder to the computer using the supplied USBcable.Connection D. Refer toConnection Diagrams (0 118).2 Computer: Depending on the software you chose to install,Transfer Utility or VideoBrowser will start up automatically.• Transfer Utility: Click [Web Upload] to upload your SD movies to theWeb. For details about using the software, click [Help] to open theSoftware Guide (PDF file).• VideoBrowser: Click in the menu panel to upload your SDmovies to the Web. For details about using the software, clickto open the Software Guide (PDF file).IMPORTANT• While the camcorder is connected to the computer, do not open thedouble memory card slot cover and do not remove the memory cards.• Observe the following precautions while the ACCESS indicator is on orflashing. Failing to do so may result in permanent data loss.- Do not open the double memory card slot cover.- Do not disconnect the USB cable.- Do not disconnect the compact power adapter or turn off thecamcorder or the computer.NOTES• The time required to convert scenes is approximately equal to the totalplayback time of the converted scenes. In most cases this is still fasterthan converting the scenes in the computer so we recommend youconvert scenes in the camcorder.• If after converting the scenes you selected the [End Without Connect-ing] option, you will need to upload the SD movies manually when youconnect the camcorder to the computer. First, open the [SD Movies]index screen on the memory card that contains the converted SD mov-ies and save them to the computer (0 123). Then, use the suppliedPIXELA’s software to upload the SD movies to the Web.• You can check and play back the converted SD movies from the [SDMovies] index screen on the memory card used for the conversion.
