Preparations 37Relay RecordingYou can activate the relay recording so if the memory you are usingbecomes full while recording movies, the recording will continue unin-terrupted on a memory card.When recording on memory card X, you can use memory card Y forrelay recording (497). only: When recording in the built-inmemory, you can choose to use only memory card X for relay record-ing (f94), or use both memory cards (f9497).1 Insert a memory card that contains no video recordings into thecard slot of the memory card you want to use for relay recording.• When relay recording from the built-in memory ( only): memorycard slot X or both memory card slots.• When relay recording from memory card X: memory card slotY only.2 Activate the relay recording.* The approximate available recording time will now reflect the combined space inthe memories used for relay recording.NOTES• You cannot use relay recording from the built-in memory to mem-ory card Y. When using a single memory card, be sure to insert it intomemory card slot X.• There will be a momentary stop in the scene at the point where thecamcorder switches from one memory to another.• Any of the following actions will deactivate the relay recording function:- Turning off the camcorder.- Opening the double memory card slot cover.- Changing the position of the mode switch.- Changing the camcorder’s operating mode.- Changing the memory used for recording movies.Operating modes:[FUNC.] 8 [MENU] 8 8 8 [Rec Media for Movies] 8[f] ( only) or [4] 8 [Relay Recording] 8Desiredoption* 8 [a]
