10PREPARATIONADJUSTABLE FEETPicture tilt and projection angle can be adjusted byrotating ADJUSTABLE FEET. Projection angle can beadjusted to 10.5 degrees.Lift front of a projector and pull FEET LOCK LATCHESon both sides of a projector.1ADJUSTABLE FEET FEET LOCKLATCHESRelease FEET LOCK LATCHES to lock ADJUSTABLEFEET and rotate ADJUSTABLE FEET to fine tuneposition and tilt.2To shorten ADJUSTABLE FEET, lift front of a projectorand pull and undo FEET LOCK LATCHES.Position and keystone distortion of image can be adjustedusing Menu Operation. (Refer to P 21 and 37.)3INSTALLING PROJECTOR IN PROPER POSITIONInstall the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.10˚10˚Do not tilt the projector more than 10 degrees above and below.Do not point the projector up to project an image.Do not point the projector down to project an image.Do not put the projector on either side to project an image.NO UPWARDNO DOWNWARDNO SIDEWAYS