Canon LV-7565F Owner's Manual

Also see for LV-7565: Specifications Brochure & specs Brochure Specification

Contents

Canon LV-7565F Owner's Manual Manual pdf 25 page image

25COMPUTER INPUTPC ADJUSTMENTAUTO PC ADJUSTMENTAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to yourcomputer. Auto PC Adjustment function can be operated as follows.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer to PCADJUST Menu icon.12 Press POINT UP/DOWN button to move a red frame pointer toAUTO PC Adj. icon and then press SET button.This Auto PC Adjustment can be also executed by pressingAUTO PC ADJ. button on Top Control or on Remote ControlUnit.PC ADJUST MENUAuto PC Adj.Store adjustment parameters.Adjustment parameters from Auto PC Adjustment can be memorizedin this projector. Once parameters are memorized, setting can bedone just by selecting Mode in PC SYSTEM Menu (P24). Refer tostep 3 of MANUAL PC ADJUSTMENT section (P27).NOTE Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustmentfunction. When image is not provided properly through this function, manual adjustments are required. (Refer to page 26,27.) Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and “480p”, “575p”, “480i”, “575i”“720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.PC ADJUST Menu iconMove a red frame pointer to AUTOPC Adj. icon and press SET but-ton.