Canon LV-7565F Owner's Manual

Also see for LV-7565: Specifications Brochure & specs Brochure Specification

Contents

Canon LV-7565F Owner's Manual Manual pdf 26 page image

26COMPUTER INPUTMANUAL PC ADJUSTMENTThis projector can automatically tune to display signals from most personal computers currently distributed. However, somecomputers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan systemof this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickeringpicture, a non-synchronized picture, a non-centered picture or a skewed picture.This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those specialsignal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. Thisenables you to recall setting for a specific computer whenever you use it.Note : This PC ADJUST Menu cannot be operated when in digital signal input on DVI terminal is selected on PC SYSTEMMENU (P24).Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer to PCADJUST Menu icon.12 Press POINT UP/DOWN button to move a red frame pointer toitem that you want to adjust and then press SET button.Adjustment dialog box will appear. Press POINT LEFT/RIGHTbutton to adjust value.Adjusts an image as necessary to eliminate flicker from display.Press POINT LEFT/RIGHT button to adjust value. (From 0 to 31.)Fine syncAdjust the number of total dots in one horizontal period. PressPOINT LEFT/RIGHT button(s) and adjust number to match your PCimage.Total dotsAdjusts horizontal picture position. Press POINT LEFT/RIGHTbutton(s) to adjust position.HorizontalAdjusts vertical picture position. Press POINT LEFT/RIGHTbutton(s) to adjust position.VerticalPress SELECT button to show information of computer selected.Current modeAdjusts clamp position. When image has a dark bar(s), try thisadjustment.ClampShows status(Stored / Free) ofselected Mode.Selected ModePress SET button at Currentmode icon to showinformation of computerconnected.Current modePC ADJUST MENUPC ADJUST Menu iconMove a red frame icon to item andpress SET button.Press POINT LEFT/RIGHTbutton to adjust value.Press SET button at this icon toadjust “Clamp,” “Display area (H/V)”or set “Full screen.”Press SET button at this icon todisplay previous items.