Canon LV-7565F Owner's Manual

Also see for LV-7565: Specifications Brochure & specs Brochure Specification

Contents

Canon LV-7565F Owner's Manual Manual pdf 8 page image

8PREPARATIONSETTING-UP PROJECTORThis projector uses nominal input voltages of 100-120 V or 200-240V AC. This projector automatically selects the correct inputvoltage. It is designed to work with single-phase power systemshaving a grounded neutral conductor. To reduce risk of electricalshock, do not plug into any other type of power system.Consult your authorized dealer or service station if you are not sureof the type of power supply being in use.Connect a projector with a peripheral equipment before turning aprojector on. (Refer to pages 12 ~ 14 for connection.)CAUTIONFor safety, unplug AC Power Cord when an appliance is notused.When this projector is connected to the outlet with AC PowerCord, an appliance is in Stand-by Mode and consumes a littleelectric power.CONNECTING AC POWER CORDConnect AC Power Cord (supplied) to a projector.The AC outlet must be near this equipment andmust be easily accessible.To the POWER CORDCONNECTOR on theprojector.Projector side AC Outlet sideGroundNOTE ON THE POWER CORDThe AC Power Cord must meet the requirement of the country where you use the projector.Confirm the AC plug type with the chart below. The proper AC power cord must be used.If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.To the AC Outlet.(120 V AC)For Continental EuropeFor the U.S.A. and CanadaTo the AC Outlet.(200 - 240 V AC)