112 VideoCapturing Video Snapshot Scenes and Photos from a MovieYou can capture video snapshot scenes or photos from a previouslyrecorded scene. For example, you may want to print photos from videorecorded at a party or create a small video clip using video snapshotscenes from the highlights of an event.Operating modes:Capturing a Video Snapshot Scene1 Play back the scene or story from which you want to capture thevideo snapshot scene.2 Press Y to capture the video snapshot scene.The camcorder captures the video snapshot scene for about 4seconds (the blue frame serves as a visual progress bar), and thenenters playback pause mode. You can change the length of the videosnapshot scenes you capture to 2 or 8 seconds with the r >[Video Snapshot Length] setting.3 Touch [Ñ] to stop the playback.NOTES• A video snapshot scene can be captured only during playback; it can-not be captured during playback pause mode.• The captured video snapshot scene is saved to the same memory thatcontains the source scene.• Video snapshot scenes cannot be captured from any of the followingtypes of scenes.- Scenes shorter than 1 second- */)/( Scenes that were edited using the suppliedsoftware VideoBrowser and were then transferred to a memory cardconnected to the computer.• When the source scene is itself a video snapshot scene, you may notbe able to capture a video snapshot scene depending on the length ofthe source scene and the length currently selected for video snapshotscenes.COPYDownloaded From VideoCamera-Manual.com Manuals