Canon Legria HF R36 Instruction Manual

Also see for LEGRIA HF R306: Instruction manual Quick guide

Contents

198 Additional InformationNeed to recover files from the memory card. Change the position of the LOCK switch on thememory card.- This message will appear the next time you turn on the camcorder if power supply was acci-dentally interrupted while the camcorder was writing on the memory card and later the posi-tion of the card's LOCK switch was changed to prevent erasure. Change the position of theLOCK switch.No memory card- Insert a compatible memory card into the camcorder (A 38).- The memory card may not be inserted correctly. Insert the memory card all the way into thememory card slot until it clicks.*/)/( Not enough available space- Delete some recordings on the memory card (A 60, 118) or select the [3 Mbps] bit rate forthe conversion to SD.Number of scenes already at maximum- The maximum number of AVCHD scenes (3,999 scenes) has been reached. Delete somescenes (A 60) to free some space.Number of stories already at maximum- The gallery already contains the maximum number of stories (98 stories in any one givenmemory). Delete some stories (A 63) or change the recording memory for movies (A 39).Recording was stopped due to insufficient write speed of the memory card- The data transfer rate was too high for the memory card in use and the recording wasstopped. Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.- After repeatedly recording, deleting and editing scenes (fragmented memory), it will takelonger to write data on the memory and recording may stop. Save your recordings (A 129)and initialize the memory (A 41).Scene recorded using another device. Cannot copy the scene.- Scenes that were not recorded with this camcorder cannot be copied to the memory card.- Scenes that were edited using the supplied PIXELA's software (*/)/( only) orother software cannot be copied or divided.Scene recorded using another device. Cannot divide the scene.- Scenes that were not recorded with this camcorder cannot be divided with this camcorder.- Scenes that were edited using the supplied PIXELA's software (*/)/( only) orother software cannot be copied or divided.Scene recorded using another device. Cannot play back the scene.- Scenes that were not recorded with this camcorder cannot be played back.Select the desired scene number- A number of scenes have the same recording date but different file control information. Thiscan occur for example when you edit movies and write the files back to the camcorder. Selecta number to display the corresponding group of scenes.COPYDownloaded From VideoCamera-Manual.com Manuals