140 External ConnectionsInstallationInstall the software before you connect the camcorder to the computerfor the first time. Refer to the Startup Guide (supplied leaflet) and followthe instructions in the Software Guide (PDF file) to install the suppliedPIXELA’s software.Converting Scenes into Standard Definition from the [ Movies] IndexScreenOperating modes:1 Power the camcorder using the compact power adapter.2 Make sure there is a memory card in the memory card slot withsufficient available space.3 Open the [ Movies] index screen.• Check that you have selected the & (built-in memory) tab.• To convert all the scenes recorded on a specific date, drag yourfinger left/right until the desired date appears in the title bar.4 Touch [Edit] > [Convert HD'SD (&'*)] and select one of theoptions for converting multiple scenes.• You can convert all the scenes recorded on the date shown in thecontrol button, select individual scenes to convert or convert all thescenes.• When you select [Select], perform the procedure described below toselect the individual scenes you want to convert.5 Review the conversion settings and touch [Next].• If a copyright notice appears, read it carefully and touch [OK] if youagree.• Before touching [Next], you can touch [w] to change the conversionsettings as described below.6 Touch [START] to convert the scenes.• Before touching [START], you can touch [Ò] to decorate theconverted SD movies (A 73), or touch [Ý] to adjust the volume(A 55) and background music balance (A 83).• You can also decorate the scenes as they are being converted.• Touch [STOP] to interrupt the operation while it is in progress.COPYDownloaded From VideoCamera-Manual.com Manuals
