Additional Information 189When playing back scenes/slideshow with background music, the music track is not playedback correctly.- This can occur when you transfer the music files to a memory card after repeatedly recordingand deleting scenes (fragmented memory). Save your recordings (A 129) and initialize thememory card (A 41). Then, transfer the music files first and only then transfer the videofiles.- Music tracks will not play back correctly if the connection was interrupted while transferringthe music files to a memory card. Delete the music tracks and transfer the music files again.- The transfer rate of the memory card used is too slow. Use a recommended memory card(A 36).Cannot divide scenes- You cannot divide scenes recorded or edited using another device and then transferred to amemory card connected to the computer. Also, you cannot divide scenes that are from moviesconverted to standard definition (*/)/( only) or MP4 movies.- The memory is full. Delete some recordings (A 60, 118) to free some space.Cannot mark individual scenes/photos in the index screen with a checkmark !- You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [AllPhotos] option instead of [Select].Indicators and Onscreen DisplaysAfter ê lights up in yellow and you turn off the camcorder, it cannot be turned on again.- The battery charge has become low or the battery pack is exhausted. Replace or charge thebattery pack.lights up in red.- Battery pack is exhausted. Replace or charge the battery pack.appears on the screen.- The camcorder cannot communicate with the optional battery pack attached so the remainingbattery charge cannot be displayed.* lights up in red.- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memorycard. Initialize the memory card if the display does not change back to normal.- The memory card is full. Replace the memory card or delete some recordings (A 60, 118)to free some space on the memory card.Even after stopping recording, the ACCESS indicator does not go off.- The scene is being recorded in the memory. This is not a malfunction.COPYDownloaded From VideoCamera-Manual.com Manuals
