111Live View ShootingWith the camera ready to shoot,press <0>.X The Live View image will appear onthe LCD monitor in real-time with100% field of view.With the video cable (provided)connecting the camera to a TV set, youcan view images on the TV. (p.122)In the same way as during shooting through the viewfinder, you can setthe shooting functions (shooting mode, drive mode, memory cardselection, image size, ISO speed, Picture Style, white balance,exposure compensation, AEB, AE lock, flash exposure compensation,etc.) while looking at the top/rear LCD panel or LCD monitor.Displaying Live View Image on the LCD MonitorSetting the Shooting FunctionsDuring Live View image display, if you point the camera in a different direction, itmight throw off the correct brightness momentarily and the image might not lookright. Wait until the image stabilizes at the correct brightness before shooting.If you shoot while the image brightness is not yet stable, the resulting imagemight be overexposed or underexposed.If the light source within the image changes, the screen might flicker. If thishappens, press <0> to end the shooting, then with the new light source inplace, press <0> again to resume shooting.Only the metering mode cannot be changed. Focusing frame-linkedevaluative metering with the image sensor will take effect.Continuous shooting is possible.The metering and AE lock activated with the <A> button will remainactive for 16 sec.To set the white balance, memory card selection, or image size, pressthe <B> button and set it with the <5> or <6> dial.The focus preset feature on super telephoto lenses cannot be used.COPY
