190If there is a problem, first refer to this Troubleshooting Guide. If thisTroubleshooting Guide does not resolve the problem, contact yourdealer or nearest Canon Service Center.To prevent mishaps, the battery charger cannot recharge any batteryother than Battery Pack LP-E4.The battery is not properly installed in the camera. (p.29)Make sure the memory card slot cover is closed. (p.32)If the top LCD panel does not display the camera settings, rechargethe battery. (p.26)The images are still being recorded to the memory card. After all theimages are recorded to the memory card, the access lamp turns offand the camera turns off automatically.Use a fully-charged battery. (p.26)The battery performance might have degraded. See the [6 Batteryinfo.] menu to check the battery’s performance level (p.187). If thebattery performance is poor, replace the battery with a new one.Auto power off is in effect. If you do not want auto power off to takeeffect, set the [5 Auto power off] menu to [Off].Troubleshooting GuidePowerThe battery cannot be recharged with the battery charger provided.The camera does not operate even when the power switch isset to <1>.The access lamp remains on even when the power switch isset to <2>.The battery becomes exhausted quickly.The camera turns off by itself.COPY
