143wPrinting5 Set the date and file numberimprinting.Set as necessary.Turn the <5> dial to select <I>,then press <0>.Turn the <5> dial to select thedesired setting, then press <0>.6 Set the number of copies.Set as necessary.Turn the <5> dial to select <R>,then press <0>.Turn the <5> dial to select thenumber of copies, then press <0>.7 Start printing.Turn the <5> dial to select [Print],then press <0>.X The printing will start.You can also print RAW and sRAW images taken by the camera.With RAW+JPEG images, the RAW image will be printed. And withsRAW+JPEG images, the JPEG image will be printed.For details on trimming, see page 145.The [Default] setting for printing effects and other options are theprinter’s own default settings as set by the printer’s manufacturer. Seethe printer’s instruction manual to find out what the [Default] settings are.Depending on the image’s file size and recording quality, it may takesome time for the printing to start after you select [Print].If image tilt correction (p.145) has been applied, it will take longer to printthe image.After the [Do not disconnect cable] message disappears, you candisconnect the cable even during printing.To stop the printing, press <0> while [Stop] is displayed, then select [OK].COPY
