Canon MARK III EOS-1 DS Instruction Manual

Contents

Canon MARK III EOS-1 DS Instruction Manual Manual pdf 55 page image

55Setting the Image-recording QualityThe image-recording quality (compression rate) can be set for eachimage size 3/4/5/6.1 Select [JPEG quality].Under the [2] tab, select [JPEGquality], then press <0>.2 Select the image size.Turn the <5> dial to select theimage size, then press <0>.3 Set the desired quality(compression rate).Turn the <5> dial to select setting,then press <0>.The higher the number, the higher thequality will be (lower compression).For 6 - 10, <i> is displayed. For 1 -5, <o> is displayed.3 Setting the JPEG Quality (Compression Rate)If the viewfinder displays “99” for the maximum burst, it means the maximumburst is 99 or higher. If 98 or lower is displayed, the maximum burst is 98 orlower. If you stop the continuous shooting, the maximum burst will increase.After all the captured images are written to the memory card, the maximumburst will be as listed on page 53.The higher the image-recording quality, the fewer the number of possibleshots will be. On the other hand, the lower the image-recording quality, thehigher the number of possible shots will be.COPY