Changing the Settings in the Wireless LAN SheetTo change the wireless network settings of the printer, connect the printer and the computer with a USBcable temporarily. If you modify the wireless network settings of the computer over wireless connectionwithout USB connection, your computer may not be able to communicate with the machine after modifyingthe settings.Note• This screen is not available depending on the printer you are using.• Activate the wireless LAN setting of the printer to change the settings in the Wireless LAN sheet.1. Start up IJ Network Tool.2. Select the printer in Printers:.When the printer is connected to the computer with a USB cable temporarily, select the printer with"USBnnn" (where "n" is a number) appearing in the Port Name column.3. Select Configuration... from the Settings menu.4. Click the Wireless LAN tab.The Wireless LAN sheet is displayed.For details on the Wireless LAN sheet, see Wireless LAN Sheet.5. Change the settings or confirm.SSID:Enter the same value that was set for the target access point.When the printer is connected with USB, the Search screen appears by clicking Search.... Set theSSID of the access point by selecting the one of the detected access points.Search Screen296
