Chapter 33-55the operation panel [3].F-3-3533.3.3.6 Removing the Scanner Cover Unit 0007-80811) Remove the copyboard cover.2) Remove the 2 screws [1].3) Remove the 6 claws [2], and detach the scanner cover unit [3].F-3-3543.3.4 CCD Unit3.3.4.1 Removing the Rear Cover 0007-80951) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-3553) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-3564) Close the reader assembly; then, detach the rear cover[1].F-3-3573.3.4.2 Removing the Scanner Unit 0007-80961) Remove the platen glass cover.2) While removing the left and right claws, detach the hinge cover [1].3) Remove the screw [2], and detach the cable guide [3].F-3-3584) Open the harness band [1], and free the 2 cables [2] connected to thereader assembly.F-3-3595) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] tothe back, and lift it to detach.[1][2] [2][3][1][2][2][3][2][2][3][1][3][4][5][2][3][1][3][2][1][3][2][2] [1]
