Chapter 33-60F-3-3896) Remove the 2 gears [1] [3]; then, detach the 2 bearings [2] [4], and detachthe pickup roller unit [5].F-3-3903.3.5.7 Removing the Separation guide unit 0009-87651) Remove the Separation guide unit [1].F-3-3913.3.6 Feed Roller3.3.6.1 Removing the Rear Cover 0009-90001) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-3923) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-3934) Close the reader assembly; then, detach the rear cover[1].F-3-3943.3.6.2 Removing the Scanner Unit 0009-90011) Remove the platen glass cover.2) While removing the left and right claws, detach the hinge cover [1].3) Remove the screw [2], and detach the cable guide [3].F-3-3954) Open the harness band [1], and free the 2 cables [2] connected to thereader assembly.F-3-3965) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] tothe back, and lift it to detach.[1][2][1] [2] [3][4][5][1][2][3][1][3][4][5][2][3][1][3][2][1][3][2][2] [1]
