Chapter 33-67F-3-4413.3.9.2 Removing the Scanner Unit 0007-80841) Remove the platen glass cover.2) While removing the left and right claws, detach the hinge cover [1].3) Remove the screw [2], and detach the cable guide [3].F-3-4424) Open the harness band [1], and free the 2 cables [2] connected to thereader assembly.F-3-4435) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] tothe back, and lift it to detach.F-3-4443.3.9.3 Removing the SCNT Board Unit 0007-80851) Remove the 8 screws [1] from behind the scanner unit, and shift up theSCNT board unit [2].F-3-4452) Open the SCNT board unit; then, disconnect the 6 connectors [1] and the3 flat cables [2].F-3-4463.3.9.4 Removing the ADF Unit 0007-80861) Open the ADF unit [1], and detach the stopper [2].2) Remove the 3 claws [3], and detach the ADF front cover [4].F-3-4473) Remove the ferrite core [1] from behind the scanner unit; then, free theharness from the tape [2].F-3-4484) Open the ADF unit [1] as shown; then, disengage it starting with the rearand then the front.[2][3][1][3][2][1][3][2][2] [1][2][1][1][1][1][2][1][2][1] [2][3][4][1][2][1] [2]
