Copying/Printing Stops Before It Is CompletedCheck1 Is the paper loaded?Make sure that paper is loaded.If the machine has run out of paper, load paper.Check2 Do the printing documents have lots of photographs or illustrations?As printing large data such as photos or graphics takes time for the machine and the computer to process, themachine may appear to have stopped operating.In addition, when printing data that uses a large amount of ink continuously on plain paper, the machine maypause temporarily. In either case, wait until the process is complete.Note• If you are printing a document with a large printing area or printing multiple copies of a document, printingmay pause to allow the ink to dry.Check3 Has the machine been printing continuously for a long period?If the machine has been printing continuously for a long time, the print head or other parts around it mayoverheat. The machine may stop printing at a line break for a period of time and then resume printing.In this case, wait for a while without operation. If the printing still does not resume, interrupt your print session ata convenient time and turn the machine off for at least 15 minutes.Caution• The print head and the surrounding area can become extremely hot inside the machine. Never touch theprint head or nearby components.Check4 If copying stops before it is completed, try to copy again.If a certain time passes after some errors occurred while copying, the machine stops the operation.12
