1. Enable printer access control(MAC address)Select to enable access control to the printer by MAC address.Note• The two types of access control (i.e., by MAC address and by IP address) can be enabled atthe same time.An access control type is enabled as long as the Enable printer access control check box isselected, regardless of the type currently displayed by selecting in Printer Access ControlType:.• When both access control types are enabled at the same time, a computer or a network devicewhose address is registered to either list will be allowed access to the printer.2. Accessible MAC Addresses:Shows the registered MAC addresses and any comments.3. Edit...The Edit Accessible MAC Address screen is displayed to edit the settings selected in AccessibleMAC Addresses:.Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen4. Add...The Add Accessible MAC Address screen is displayed to register the MAC address of a computer ora network device from which to access the printer over the network.Important• Add the MAC address of all computers or network devices within the network from which toaccess the printer. The printer cannot be accessed from a computer or a network device that isnot on the list.5. DeleteDeletes the selected MAC address from the list.When Selecting IP addressThe accessible computers or network devices are specified by their IP addresses. Computers or networkdevices whose IP addresses appear on the list are allowed access.311
