Forwarding Scanned Data to Computer Using Operation PanelBefore forwarding scanned data to the computer, check the following:• MP Drivers are installed. (Windows)If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from theCanon website.• The scanner driver is installed. (Mac OS)If the scanner driver is not yet installed, install the scanner driver from the Canon website.• The machine is connected to a computer correctly.Make sure the machine is connected to the computer correctly.Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in thesleep or standby mode.If you perform scanning via a network connection, make sure all the required settings have beenspecified.◦ For Windows:Network Scan Settings◦ For Mac OS:Network Scan Settings• The destination and the file name are specified in Canon IJ Scan Utility.You can specify the destination and the file name in Canon IJ Scan Utility. For more on settings ofCanon IJ Scan Utility:◦ For Windows:Settings Dialog Box◦ For Mac OS:Settings Dialog1. Make sure machine is turned on.2. Select Scan on HOME screen.LCD and Operation PanelIf you forward the data to the USB-connected computer:The Scan standby screen is displayed.774
