1. Enable printer access control(IP address)Select to enable access control to the printer by IP address.Note• The two types of access control (i.e., by MAC address and by IP address) can be enabled atthe same time.An access control type is enabled as long as the Enable printer access control check box isselected, regardless of the type currently displayed by selecting in Printer Access ControlType:.• When both access control types are enabled at the same time, a computer or a network devicewhose address is registered to either list will be allowed access to the printer.2. Accessible IP Addresses:Shows the registered IP addresses and any comments.3. Edit...The Edit Accessible IP Address screen is displayed to edit the settings selected in Accessible IPAddresses:.Edit Accessible IP Address Screen/Add Accessible IP Address Screen4. Add...The Add Accessible IP Address screen is displayed to register the IP address of a computer or anetwork device from which to access the printer over the network.Important• Add the IP address of all computers or network devices within the network from which to accessthe printer. The printer cannot be accessed from a computer or a network device that is not onthe list.• Up to 16 IP addresses can be registered. IP addresses specified by Range Specification arecounted as one address. Use Range Specification when you intend to register 17 or more IPaddresses.312
