Canon MP 700 Service Manual

Contents

3-8MultiPASS MP730/MP700 Chapter 3: Assembly and Disassembly1.4 All Clear (Action in the Event of Abnormality)In the event of extreme noise or shock, etc., in very rare cases, the display may go out, and all thekeys become inoperable. In that case, perform an All Clear. This operation returns all values andsettings to their default settings. However, as all settings, such as received images and user data,service data, etc., will be re-initialised, be sure to note down any settings that you will need to re-enter later.After you have executed ‘all clear’, set the type setting (country setting).Figure 3-4 All Clear Operation1.5 Shipping the Main UnitIf you must ship the machine as after making repairs, be sure to go through the following:(1) See to it that the BJ cartridge (printhead) remains fitted in the carriage.(2) Press the On/Off key to turn off the power, and fix the carriage in its home position;then, disconnect the power cord.If you leave the BJ cartridge (printhead) alone on its own, the ink can start tocake. Be sure to keep the BJ cartridge fitted in the carriage in the course ofshipment.On the other hand, if the carriage is not fixed to its home position, it can moveright/left during shipment, possibly imposing stress on the paper feed encoderfilm. Check to make sure it is fixed in its home position.Menu Copy SetSet Execute All clear StandbySelect #8 CLEARSelect ALL# SERVICE MODE#8 CLEAR#8 CLEARALLMenu Copy SetSetStop/ResetSetting the country typeStandbySelect #5 TYPESelect U.S.A.# SERVICE MODE#5 TYPE#5 TYPEU.S.A.