Canon MP 700 Service Manual

Contents

4-24MultiPASS MP730/MP700 Chapter 4: Maintenance and Serviced) New error codes and recovery methodsThose error codes that have been added starting with the product and those error codes forwhich remedies unique to the product are offered are shown together with causes andremedies, where applicable.##085 Other party does not support ITU-T Color FaxingSolution: (1) Try sending again in black & white.(2) Check the received fax machine’s setting for color faxing is available.(3) Chang the setting of MENU> MAINTENANCE> TX SETTINGS>COLOR DIRECT TX to ON.##341 Maintenance jet waste ink capacity fullSolution: Unlike errors that trigger the “CHECK PRINTER” message, This error isprogrammed so that it cannot be cleared using the Resume key. Replace thewaste ink absorber as follows in the error occurs:(1) Select 3. EEPROM CLEAR under [8] PRINTER TEST in TEST mode,and the select 0.(2) Check to make sure that no image exist in memory; then, turn off thepower, remove the appropriate parts, and replace the waste ink absorber.##342 Cleaning absorption waste ink capacity fullSolution: Unlike errors that trigger the “CHECK PRINTER” message, This error isprogrammed so that it cannot be cleared using the Resume key. Replace thewaste ink absorber as follows in the error occurs:(1) Select 3. EEPROM CLEAR under [8] PRINTER TEST in TEST mode,and the select 0.(2) Check to make sure that no image exist in memory; then, turn off thepower, remove the appropriate parts, and replace the waste ink absorber.##343 Ink detection waste ink capacity fullSolution: Unlike errors that trigger the “CHECK PRINTER” message, This error isprogrammed so that it cannot be cleared using the Resume key. Replace thewaste ink absorber as follows in the error occurs:(1) Select 3. EEPROM CLEAR under [8] PRINTER TEST in TEST mode,and the select 0.(2) Check to make sure that no image exist in memory; then, turn off thepower, remove the appropriate parts, and replace the waste ink absorber.