4-4MultiPASS MP730/MP700 Chapter 4: Maintenance and Service2. HOW TO CLEAN PARTS2.1 Main Unit Outer CoversWipe with a dry, soft cloth.2.2 Pickup/Separation Roller (MP730 only)Open the ADF cover, and wipe with a dry, soft cloth.2.3 Document U-Turn/Feed/Eject Roller (MP730 only)Open the ADF cover, and wipe with a dry, soft cloth.2.4 Separation Guide (MP730 only)Open the ADF cover, and wipe with a dry, soft cloth.2.5 Document Guide Sheet (MP730 only)Open the ADF ass'y, and wipe with a dry soft cloth.2.6 Document GlassOpen the pressure plate or ADF ass'y, and wipe with a dry soft cloth.2.7 White Sheet AreaDetach the document glass from the machine, and wipe the rear side (white sheet attached area)of the document glass with a dry, soft sloth.2.8 Printer PlatenOpen the flatbed ass'y, and wipe with a cloth moistened with a little water.If the parts above are very dirty, wipe with a cloth moistened with IPA(isopropyl alcohol).Do not use tissue paper. Dust from the tissue paper causes static electricity.Precautions when Using IPAWhen cleaning with IPA, take care to prevent the IPA from splashing high-temperature parts. If IPA splashes high-temperature parts, leave for at leastthree minutes to allow the IPA to evaporate.NOTE
