Canon MX450 series Online Manual

Also see for MX450 series: Setup manual Setup guide Online manual Online manual Online manual

Contents

1303CausePaper is jammed inside the machine at the transport unit.ActionIf you can see the jammed paper at the front tray, or you cannot see the paper either at the paperoutput slot or at the front tray, remove the paper from the transport unit.Remove the paper following the procedure below.ImportantThe power cannot be turned off while the machine is sending or receiving a fax, or when thereceived fax or the unsent fax are stored in the machine's memory.Make sure if the machine completed sending or receiving all the faxes before disconnecting thepower cord.If you unplug the power cord, all the faxes stored in the machine's memory are deleted.NoteIf you need to turn off the machine to remove jammed paper during printing, press the Stopbutton to cancel print jobs before turning off the machine.1. Turn the machine off, then unplug the power cord.2. Open the document tray, then open the document cover.3. Stand the machine with the right side facing down.If you can see the jammed paper at the front tray, stand the machine with the front tray open.ImportantIf a USB flash drive is inserted in the USB flash drive port, remove it before you stand themachine.Stand the machine on a wide and flat surface such as a desk.When you stand the machine, hold it securely and be careful not to hit it on a hard object.4. Push the open lever to open the transport unit.When you open the transport unit, support the machine with your hand so that it does not falldown.5. Pull out the jammed paper slowly.When you pull the jammed paper, support the machine with your hand so that it does not falldown.