Canon MX450 series Online Manual

Also see for MX450 series: Setup manual Setup guide Online manual Online manual Online manual

Contents

Paper Does Not Feed Properly/"No Paper" Error Occurs• Check 1: Make sure that paper is loaded.Loading Paper• Check 2: Make sure of the following when you load paper.• When loading two or more sheets of paper, flip through the paper before loading.• When loading two or more sheets of paper, align the edges of the sheets before loading.• When loading two or more sheets of paper, make sure that the paper stack does not exceed thepaper load limit.However, proper feeding of paper may not be possible at this maximum capacity depending onthe type of paper or environmental conditions (either very high or low temperature and humidity).In such cases, reduce the sheets of paper you load at a time to less than half of the paper loadlimit.• Always load the paper in portrait orientation, regardless of the printing orientation.• When you load the paper, load the paper with the print side facing DOWN and slide the paperguides to align with the both sides of the paper.Loading Paper• When you load the paper, insert the paper stack until the leading edge touches the far end of thefront tray.• Check 3: Check to see if the paper you are printing on is not too thickor curled.Media Types You Cannot Use• Check 4: Make sure of the following when you load Hagakis orenvelopes.• If a Hagaki is curled, it may not feed properly even though the paper stack does not exceed thepaper load limit.Load Hagakis with a zip code column toward the far end of the front tray.• When printing on envelopes, refer to Loading Paper, and prepare the envelopes before printing.Once you have prepared the envelopes, load them in portrait orientation. If the envelopes areplaced in landscape orientation, they will not feed properly.• Check 5: Confirm that the media type and the paper size settingscorrespond with the loaded paper.• Check 6: If multiple sheets of plain paper is fed from the machine,select the setting for preventing double-feed of plain paper.If multiple sheets of plain paper is fed from the machine, select the setting for preventing double-feedof plain paper using the operation panel or your computer.After printing is finished, disable the setting for preventing double-feed of plain paper; otherwise, thesetting is applied from the next time.• To set by using the operation panel