3. Search...The Search screen is displayed to select a wireless router to connect to.Search ScreenNote• When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected. Connectthe printer and the computer with a USB cable temporarily to change the settings.4. Encryption Method:Select the encryption method used over the wireless LAN.Do not useSelect to disable encryption.Use WEPTransmission is encrypted using a WEP key you specified.If a WEP key has not been set, the WEP Details screen is displayed automatically. To change WEPsettings set before, click Configuration... to display the screen.Changing the WEP Detailed SettingsUse WPA/WPA2Transmission is encrypted using a WPA/WPA2 key you specified.The security has been strengthened more than WEP.If a WPA/WPA2 key has not been set, the Authentication Type Confirmation screen is displayedautomatically. To change WPA/WPA2 settings set before, click Configuration... to display theWPA/WPA2 Details screen.Changing the WPA/WPA2 Detailed Settings5. Configuration...The detailed settings screen is displayed. The WEP or the WPA/WPA2 key selected in EncryptionMethod: can be confirmed and changed.For details on WEP setting:Changing the WEP Detailed SettingsFor details on WPA/WPA2 setting:Changing the WPA/WPA2 Detailed Settings6. TCP/IP Setup:Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your networkenvironment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCP serverfunctionality must be enabled on your wireless router.Use next IP addressSelect this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.256Downloaded from ManualsPrinter.com Manuals
