Canon MX490 series Online Manual

Also see for MX490 Series: Online manual Online manual Connecting guide Manual Manual

Contents

Error Message Appears and the ScanGear (Scanner Driver) ScreenDoes Not AppearCheck 1 Make sure that your scanner or printer is turned on.Check 2 Turn off your scanner or printer, then reconnect the USB cable and replug thepower cord.Check 3 Connect the USB cable to a different USB port on the computer.Check 4 If the USB cable is connected to a USB hub, remove it from the USB hub andconnect it to a USB port on the computer.Check 5 Make sure that MP Drivers is installed.If not installed, install MP Drivers from the Setup CD-ROM or the web page.Check 6 Select your scanner or printer on the application's menu.Note• The operation may differ depending on the application.Check 7 Make sure that the application supports TWAIN.You cannot start ScanGear (scanner driver) from applications not supporting TWAIN.Check 8 Exit ScanGear if it is running on another application.848Downloaded from ManualsPrinter.com Manuals