Cannot Detect the Machine during Wireless LAN Setup: Check 6Make sure that the machine is not placed far away from the wireless router.The wireless router is located indoors within the effective range for wireless communication. Locate themachine within 164 ft. / 50 m from the wireless router.In addition, check where the machine and the wireless router are located and take the appropriate action.• Make sure that there is no obstruction between the machine and the wireless router.Wireless communication between different rooms or floors is generally poor. Adjust the location of themachine and the wireless router.• Make sure that there is no source of radio wave interference near the machine or the wireless router.If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station isplaced nearby, the device may cause interference. Place the machine or the wireless router as faraway from the interference source as possible.After checking above and taking the appropriate action, perform setup again.Note• You can set up the network communication via USB. To set up via USB, select the Set up thenetwork connection via USB check box on the Check Printer Settings screen and click Next.790Downloaded from ManualsPrinter.com Manuals