Canon MX520 series Online Manual

Also see for MX520 series: Setup guide Online manual Online manual Fax guide Online manual

Contents

• Check 7: Is Type set to other than Plain paper?If Type is set to other than Plain paper, the received fax will not be printed and will be stored in themachine's memory (Memory Reception). Set Type to Plain paper.Changing the Paper Settings• Check 8: Is paper loaded?If paper is not loaded, received faxes will be stored in the machine's memory without being printed(Memory Reception). Load paper, then press the OK button.• Check 9: Is the amount of remaining ink sufficient to print a fax?If the amount of remaining ink is insufficient to print, received faxes will be stored in the machine'smemory without being printed (Memory Reception). Replace the FINE cartridge, then print the faxes inthe machine's memory.Document Stored in Machine's MemoryNoteIf the machine was receiving faxes in the fax mode, printing will start automatically after the FINEcartridge is replaced.Replacing a FINE CartridgeWhen the machine receives black & white faxes in the machine's memory, if 2-sided is selectedfor 2-sidedPrintSetting in FAX paper settings in the Fax menu, selecting 1-sided may print thefaxes.You can set the machine to forcibly print a received fax even if the ink has run out.Set Print when out of ink in Auto print settings under FAX settings to Print.However, part or all of the fax may not be printed since the ink has run out.Also, the contents of the fax will not be stored in the machine's memory.If the ink has already run out, we recommend that Do not print be selected for Receiveddocuments in Auto print settings under FAX settings to store the received fax in the machine'smemory. After you replace the FINE cartridge and select Print for Received documents in Autoprint settings, the fax stored in the machine's memory will be printed automatically.Auto print settings• Check 10: Is the machine set to the appropriate receive mode?Check the receive mode setting and change it to a mode suited to your connection if necessary.Setting the Receive Mode• Check 11: Is FAX reception reject set to ON?Select OFF for FAX reception reject in Security control under FAX settings.For details on how to set, see Rejecting Fax Reception.• Check 12: Are there setting items set Reject in Caller rejection?If you select Reject for any setting items in Caller rejection in Security control under FAX settings,the machine rejects calls for setting item selected Reject.For details on how to set, see Using the Caller ID Service to Reject Calls.Machine Does Not Switch Automatically between Voice and Fax Calls• Check: Is the receive mode set to FAX only mode?If FAX only mode is selected for Receive mode settings, there will be no automatic switchingbetween voice and fax calls.Set the receive mode to TEL priority mode, DRPD*1, or Network switch*2.If the receive mode is TEL priority mode and an answering machine is connected to the machine,check whether a proper message is played back when the answering machine answers.Setting the Receive Mode*1 This setting is available only in the US and Canada.*2 This setting may not be available depending on the country or region of purchase.