Canon MX520 series Online Manual

Also see for MX520 series: Setup guide Online manual Online manual Fax guide Online manual

Contents

stored in the machine's memory will be printedautomatically.Auto print settings• Paper has run out:Load the paper and press the OK button.• A different size of paper from that specified by Page size isloaded:Load the same size of paper as that specified by Pagesize, then press the OK button.• Page size is set to other than A4, Letter, or Legal:Set Page size to A4, Letter, or Legal.Changing the Paper Settings• Type is set to other than Plain paper:Set Type to Plain paper.Changing the Paper Settings• You pressed the Stop button to cancel printing of a fax:Press the FAX button to resume printing of the fax.• Do not print is selected for Received documents in Autoprint settings under FAX settings:You can print the faxes stored in the machine's memoryfrom the Memory reference screen in the Fax menu.Printing a Document in Machine's MemoryNoteTo print the received faxes automatically, select Print forReceived documents in Auto print settings under FAXsettings.Auto print settingsIf you did not print the fax stored in the machine'smemory (e.g., if you did not resolve the problem bypressing the Stop button), you can delete or print the faxstored in the machine's memory later.Document Stored in Machine's MemoryBusy/no signal• The recipient's number you dialed is busy.Try dialing again after waiting for a moment.Resending Faxes (Redialing a Busy Number)• The fax/telephone number dialed is incorrect.Check the fax/telephone number and dial again.• The recipient's fax machine did not respond (after allautomatic redialing attempts).Contact the recipient and have the recipient check the faxmachine. For an overseas call, add pauses to theregistered number.• The recipient is not using a G3 machine.The machine cannot send or receive documents to/from afax machine that is incompatible with the G3 standard.Contact the recipient and ask the recipient to checkwhether the fax machine is G3 compatible.• The touch tone/rotary pulse setting on the machine isincorrect.Set the machine to match the telephone line you are using.Setting the Telephone Line TypeMemory is full.The machine's memory is full because it has sent/received toomany documents, or a detailed document.Print the faxes stored in the machine's memory or save themon the USB flash drive, and delete them from the machine'smemory.Document Stored in Machine's MemoryWhen sending a fax, resend it. If this message still appears,delete the faxes stored in the machine's memory, divide thefaxes for sending, and send them again.When receiving a fax, have the sender resend the faxes.Awaiting document processing.The received faxes were not saved on the USB flash driveautomatically because the USB flash drive was not inserted orbecause it was not writable.