Canon MX520 series Online Manual

Also see for MX520 series: Setup guide Online manual Online manual Fax guide Online manual

Contents

Print Results Not SatisfactoryIf the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm thepaper and print quality settings first.• Check 1: Do the page size and media type settings match the size andtype of the loaded paper?When these settings are incorrect, you cannot obtain a proper print result.If you are printing a photograph or an illustration, incorrect paper type settings may reduce the qualityof the printout color.Also, if you print with an incorrect paper type setting, the printed surface may be scratched.In borderless printing, uneven coloring may occur depending on the combination of the paper typesetting and the loaded paper.The method of confirming the paper and print quality settings differs depending on what you do withyour machine.To copy by operating the machine Confirm by using the operation panel on the machine.Setting ItemsTo copy photo by operating the machine Confirm by using the operation panel on the machine.Copying PhotosTo print from your USB flash drive byoperating the machineConfirm by using the operation panel on the machine.Setting ItemsTo print photo on an online photo album byoperating the machineConfirm by using the operation panel on the machine.Printing Photos in Online Photo AlbumTo print from a PictBridge compliant deviceConfirm by using your PictBridge compliant device.About PictBridge Print SettingsConfirm by using the operation panel on the machine.PictBridge print settingsTo print from a mobile phone Confirm by using the operation panel on the machine.Mobile phone print settingsTo print from a computer Confirm by using the printer driver.Printing with Easy Setup• Check 2: Make sure that the appropriate print quality is selectedreferring to the table in Check 1.Select a print quality option suitable for the paper and image for printing. If you notice blurs or unevencolors, increase the print quality setting and try printing again.NoteWhen printing from a PictBridge compliant device, set the print quality setting by using theoperation panel on the machine.You cannot make this setting from a PictBridge compliant device.You cannot change the print quality setting when printing from a mobile phone.• Check 3: If the problem is not resolved, there may be other causes.See also the sections below:Cannot Print to End of JobNo Printing Results/Printing Is Blurred/Colors Are Wrong/White StreaksColors Are UnclearLines Are MisalignedPrinted Paper Curls or Has Ink BlotsPaper Is Smudged/Printed Surface Is ScratchedBack of the Paper Is Smudged