Canon MX860 series Manual

Also see for PIXMA MX860 series: Supplementary guide On-screen manual Manual Manual Service manual

(1) Bright area (2) Dark area (3) Whole imageMore data is distributed to thehighlight side.More data is distributed to theshadow side.Data is widely distributed between thehighlight and shadow.Adjusting Histograms (Using the Slider)Select a Channel, then move (Black-point Slider) or (White-point Slider) to specify the level to beset as the shadow or highlight.- All parts to the left of (Black-point Slider) will be black (level 0).- The parts at (Mid-point Slider) will turn to the color exactly between the black-point and white-point.- All parts to the right of (White-point Slider) will turn white (level 255).Auto Tone is set to ON by default. Adjustments shown below are automatically performed.Moving the Black-point and White-point SlidersMove the Black-point Slider or White-point Slider to adjust brightness.Images with more data distributed to the highlight sideMove the Black-point Slider toward the highlight side.Images with more data distributed to the shadow sideMove the White-point Slider toward the shadow side.Images with widely distributed dataMove the Black-point Slider toward the highlight side, and White-point Slider toward the shadow side.Moving the Mid-point SliderMove the Mid-point Slider to specify the level to be set as the middle of the tonal range.Pagina 618 din 1009 paginiAdjusting Histogram