Canon MX860 series Manual

Also see for PIXMA MX860 series: Supplementary guide On-screen manual Manual Manual Service manual

ImportantThe Orientation dialog box can only be opened when Select Source is Document (ADF Simplex)or Document (ADF Duplex).Binding Location cannot be specified when Select Source is Document (ADF Simplex).Color ModeSelect how to scan the document.ColorSelect this mode to scan color documents or to create color images. This mode renders theimage in 256 levels (8 bit) of R(ed), G(reen), and B(lue).GrayscaleSelect this mode to scan black and white photos, or to create black and white images. This moderenders the image in 256 levels (8 bit) of black and white.Black and WhiteSelect this mode to scan photos and other documents in black and white. This mode renders theimage in black and white. The contrast in the image is divided at certain levels (threshold level)into black and white and is rendered in two colors. The threshold level can be set with(Threshold).Input SizeThe Paper Size is displayed before preview. After preview, the cropping frame size is displayed.You can adjust the cropping frame (scan area) size by entering the values into (Width) and(Height).Click (Keep Aspect Ratio) and change it to (Locked) to maintain the aspect ratio when youspecify the cropping frame size.ImportantInput size settings are available only when Output Size in Output Settings is Flexible. If you selecta size other than Flexible, a cropping frame calculated from Output Size and Output Resolution isdisplayed, and its aspect ratio is fixed.NoteThe values you can enter will be within the range of the selected document size. The minimumsize is 96 pixels x 96 pixels when Output Resolution is 600 dpi and enlarge/reduce is 100%.When Auto Crop is performed, the aspect ratio will not be maintained since the size will beprioritized.See " Adjusting Cropping Frames " for details on cropping frames.Page topPagina 635 din 1009 paginiInput Settings