Canon MX860 series Manual

Also see for PIXMA MX860 series: Supplementary guide On-screen manual Manual Manual Service manual

When you select MX860 series-2, the printer name displayed on the Bluetooth device is CanonMX860 series-2.The initial value is set to MX860 series-1.Graphic LCDText LCDAccess refusal ScreenWhen you search from a Bluetooth device, you can enable or disable the display of the printername.ONDisables searching from a Bluetooth device.OFF (Default setting)Enables searching and printing from a Bluetooth device.Security/Security settings ScreenEnableSelecting Enable allows you to choose either of the security modes below.Mode 3(recommended)This mode is activated on link level enforced security.The passkey will be required when a Bluetooth device communicates with the printer.Normally select this mode.Mode 2This mode is activated on service level enforced security.The passkey will be required when printing through the Bluetooth communication.After setting the security mode, we recommend making a trial print through Bluetoothcommunication. If printing does not start, change the security mode and try again.Setting a passkey will prevent unwanted access from other Bluetooth devices. You canchange the passkey on the Passkey screen.Disable (Default setting)When you register the printer, you are not required to input a passkey.Passkey ScreenWhen you select Enable on the Security or Security settings screen, you are required to set apasskey to register the printer on other Bluetooth devices.After you change the passkey, you may be asked to input the passkey on the Bluetooth devices youwere able to print from before the passkey was changed. In this case, input the new passkey.Graphic LCDPagina 786 din 1009 paginiBluetooth Settings Screen