The MultiPASS SettingsTo customize the MultiPASS to your particular needs, you can adjust the general operation,sending, receiving, printing, system settings, and speed dialing settings. There are two methodsof adjusting these settings:Method 1: Using the MultiPASS operation panelYou can adjust settings directly via the operation panel of the MultiPASS. Detailed instructions aredescribed in this manual. Adjusting settings through the operation panel is convenient when youdo not have your MultiPASS connected to a PC.Method 2: Using the MultiPASS Desktop ManagerYou can adjust settings using the MultiPASS Desktop Manager software included with yourMultiPASS. For detailed instructions refer to the online MultiPASS Desktop Manager SoftwareGuide (in Adobe® Acrobat® format).Before adjusting any settings, decide whether you prefer to make changes from the operationpanel or from the MultiPASS Desktop Manager. Using both — the operation panel and theMultiPASS Desktop Manager — may cause confusion. Changes made to settings through theoperation panel will not be displayed in the MultiPASS Desktop Manager, and changes made inthe MultiPASS Desktop Manager will override any corresponding settings made through theoperation panel.n If your MultiPASS is connected to a PC, we recommend using the MultiPASS Desktop Manager toadjust any settings.If you are using the MultiPASS Desktop Manager, you can ignore the information in this manual.Chapter 1 Introduction 1-2