Chapter 7 Summary of Settings 7-7User Settings MenuName Description SettingsDATE & TIMEUNIT TELEPHONE #UNIT NAMETX TERMINAL IDTTI POSITIONTELEPHONE # MARKSCAN CONTRASTOFFHOOK ALARMVOLUME CONTROLCALLING VOLUMEKEYPAD VOLUMEALARM VOLUMELINE MONITOR VOLTEL LINE TYPESet the date using the numeric buttons. Set the time (24-hour clock) using the numeric buttons.Enter your fax/telephone number using the numeric buttons (up to 20 digits).Enter your name or company name you want to appear at the top of each fax page you send(up to 24 characters).Set the TTI POSITION and TELEPHONE # MARK features.Select the position for the identification header (TTI) that appears on every page you send.(Can only be adjusted for black & white transmissions. For color tranmissions, the TTIinformation is positioned inside the image area.)OUTSIDE IMAGE: Position the TTI outside the image area.INSIDE IMAGE: Position the TTI inside the image area.Select the prefix for the Unit Telephone number.Select the contrast of the reproduction.DARKER: Select for light originals.LIGHTER: Select for dark originals.Enable/disable the off hook alarm. The alarm alerts you that the handset of the telephone orextension phone is off hook.Select the audio level of the following sounds:Select the volume of the ring produced when the MultiPASS detects a voice call.Select the volume of the keypad touch beep. For no sound, select “0”.Select the volume of the error alarm sound. For no sound, select “0”.Select the volume of the line monitor (sound during dialing). For no sound, select “0”.Select the dialing method the MultiPASS uses to match the telephone line type you have.––––OUTSIDE IMAGE/INSIDE IMAGEFAX/TELSTANDARD/DARKER/LIGHTERON/OFF–1/2/30/1/2/30/1/2/30/1/2/3TOUCH TONE/ROTARY PULSE/Default settings are shown in bold type.