Chapter 7 Summary of Settings 7-16ECM RXRX MODEINCOMING RINGMAN/AUTO SWITCHREMOTE RXMEMORY RXCOLOR RXEnable/disable Error Correction Mode (ECM) during reception.Select the receive mode. Refer to Chapter 5, Receiving Faxes, for details on setting thereceive mode.If you select DRPD or FAX/TEL AUTO SW, you can select sub-settings. For details onthese sub-settings, refer to page 5-22 (DRPD) or page 5-7 (FAX/TEL AUTO SW).When the MultiPASS is set to FAX ONLY MODE or FAX/TEL, enable/disable ringingwhen the MultiPASS receives a call. (Even if you have set INCOMING RING to ON, onlythe telephone connected to the MultiPASS will ring.)Select the number of incoming rings before the MultiPASS answers.Determine if the MultiPASS switches to fax receive mode after the MultiPASS rings for aspecified time when the MultiPASS is in MANUAL MODE.If you select ON, select the length of time the MultiPASS rings before switching to faxreceive mode.Enable/disable remote receiving.If you select ON, select the remote receiving ID.Enable/disable memory receiving of a document.Enable/disable color fax reception.ON/OFFFAX ONLY MODE/DRPD/FAX/TEL AUTO SWON/OFF02 TIMES(01 to 99)ON/OFF15 SEC(01 to 99)ON/OFF25 (00 to 99)ON/OFFON/OFFRX Settings MenuName Description SettingsDefault settings are shown in bold type.
