| 
6-2 Copying Chapter 6 Improving copied imagesSetting color or black & white copyingRefer to Making copies on p. 6-1 and in step 4, set color or black & white copying as follows:For color copying: Press [Color/B&W] to turn on the Color light.For black & white copying: Press [Color/B&W] to turn on the B&W light.Adjusting the image quality (resolution)Refer to Making copies on p. 6-1 and in step 4, adjust the image quality as follows:1 Press [Menu] four times.2 Use [2] or [3] to select the image quality.• In black & white mode, select:– for text-only documents.– for photographs.– for high-speed copying at a lower resolution.*In color mode, select:– for color text-only documents.– for color photographs.– for high-speed color copying at a lower resolution.*3 Press [Set].NOTE• When using , if the color output is different from that expected, select NORMAL> or and try copying again.Adjusting the exposure (density)Exposure (density) is the degree of difference between light and dark. A high exposuresetting will make blacks darker and whites brighter, whereas a low exposure setting will makethe differences between black and white less marked.Refer to Making copies on p. 6-1 and in step 4, adjust the exposure as follows:1 Press [Menu] three times.2 Use [2] or [3] to select the exposure.3 Press [Set].3 . D E N S I T Y- L T D K +4 . I M A G E Q U A L I T Y B & W T E X T * This setting is only available when is selected as the print media type ( p. 3-7). |
