Chapter 11 Machine settings 11-111Machine settingsMachine settingsChapter11 Accessing the machine settingsFollow this procedure to change a setting:1 Refer to the lists on the following pages to find the setting you want to change.2 If there is a reference for thesetting A, refer to that page fordetails. If not, at the top of the list,note under which function key Band menu C the setting is located.3 Press [Copy], [Scan], or [Photo Print]depending under which functionkey B the setting is located.4 Press [Menu] repeatedly until themenu C under which the setting islocated is displayed.5 Use [2] or [3] to select the setting you want.6 Press [Set].7 Follow these guidelines to scroll through and register settings:• Use [2] or [3] to scroll through settings.• To register a setting or access sub-settings, press [Set].• If necessary, to return to standby mode, press [Stop/Reset].NOTE• <> in the LCD indicates the current setting.Name2 on 1BORDERLESS COPYIMAGE REPEATAUTOMANUALVERTICALHORIZONTALMIRROR IMAGEENTIRE IMAGESetting————1/2/3/41/2/3/4——Detailsp. 6-5p. 6-6p. 6-7p. 6-9p. 6-10DescriptionCopies two pages on one page (letter- or A4-size only).Copies without any borders (letter, A4-, or 4" × 6"-sizeonly).size.Prints multiple copies of an image on a single sheet.Automatically selects the number of repetitions.Manually selects the number or repetitions.Select the number of vertical repetitions.Select the number of horizontal repetitions.Prints a mirror image of the original.Prints the original image to fit the selected paperMenu: SPECIAL COPY Function key: [Copy]C B AExample:
