Canon MultiPASS F20 Basic Manual

Also see for MultiPASS F20: Setup Software user's guide Specification

Contents

10-4 Troubleshooting Chapter 10 Printing stops in the middle.1. Has the machine been printing continuously over a long period?If so, the printhead will overheat. To protect the printhead, printing will stop temporarily and resumeafter a period of time. Interrupt printing when appropriate, turn off the machine and wait 15minutes.CAUTION• The area around the printhead may become extremely hot. Do not under any circumstancestouch it.2. Are you printing large files such as photographs or illustrations?If you are printing large files, it will take time to process the data and printing will appear to havestopped. Wait until data is processed. Paper does not feed properly.1. Is the paper the correct weight?Use 17–28 lb. (64–105 g/m2 ) paper.2. Does the paper stack exceed the paper limit mark (|t) or exceed the capacity of themulti-purpose tray?If so, reduce the amount of paper.3. Has the paper been loaded correctly?Check that the paper has been loaded correctly and that the paper guide is properly adjusted( Setup Sheet).4. Is the paper creased or curled?You cannot use paper that is creased. Uncurl curled paper.5. Clean the roller ( p. 9-9).6. Is there some foreign matter in the multi-purpose tray?Check and remove any foreign matter. Paper curls.1. Remove the printed page after 30 to 60 seconds.The paper may curl if you use thin paper and print images that use a large quantity of ink such asphotographs or pictures.Leave the printed page in the paper output tray for 30 to 60 seconds and remove when the ink hasdried.2. Is intensity set too high?The paper may curl or rub if intensity is set too high in the printer driver. In the Properties dialogbox, on the Main tab, click [Manual] in Color Adjustment, then click [Set]. In the Manual ColorAdjustment dialog box, reduce the intensity with the Intensity slider.3. Are you using thin paper?The paper may curl if you use thin paper and print images that use a large quantity of ink such asphotographs or pictures with intense colors. Use thicker paper such as high resolution paper orPhoto Paper Pro ( pp. 3-2, 3-3).4. Was the paper already curled before loading?Uncurl the paper and reload. Meaningless characters and symbols are printing.1. If this problem only occurs when printing a specific documentOpen and edit the document and try printing again. If this does not work, there may be a problemwith the application. Contact the application’s manufacturer. White streaks appear on the printout.1. Print the nozzle check pattern ( Maintaining the printhead, p. 9-5).2. Are you printing on coated paper?In the Properties dialog box, on the Main tab, click [High] in Print Quality.PPPPPPPPPPPP