Chapter 10 Troubleshooting 10-910Troubleshooting Cannot write to the memory card (write protect error displayed in Windows).1. Is the machine in photo print mode and card protection set to ?Windows 98/ME: Switch to a different mode and set the setting to ( p. 11-3).Then disconnect and reconnect the USB cable.Windows 2000/XP: Switch to a different mode and set the setting to ( p. 11-3). If necessary, disconnect then reconnect the USB cable.2. If a delayed write failed error is displayed in Windows 2000This error appears if you do not disconnect then reconnect the USB cable after setting PROTECT> to or switching to photo print mode. Disconnect then reconnect the USB cable aftersetting to or switching to photo print mode.CAUTION• In Windows 2000, when you move from the hard disk to the memory card, writing will failand the original file may be lost.3. If you have connected in Windows XPThe date and time of access is written in the Windows XP preview and if is set to or photo print mode is selected, a write protect error may be displayed. Disconnect thenreconnect the USB cable. Removable disk does not appear in Windows Explorer.This behavior can occur if you map a network drive to the next available drive letter after thelocal volumes and CD-ROM drives have been assigned drive letters. Do the following if youexperience this problem:1. Assign the network drive to any other drive letters.2. Restart your computer.
