Canon MultiPASS F50 Fax Manual

Also see for MultiPASS F50: Reference guide Software user's guide Setup instructions User manual Specification

Contents

5-2Setting the Options for FAX/TEL AUTO SWIf you set FAX/TEL AUTO SW, you can control precisely how the machine handles incoming calls by adjustingthe following settings:• Adjust the time the machine takes to check whether a call is from a fax machine or a telephone (RING STARTTIME setting).• Adjust the length of time the machine rings when the call is a voice call (F/T RING TIME setting).• Set whether the machine switches to receive mode after the ring time set in F/T RING TIME has elapsed(DEFAULT ACTION setting).• You can also set these options from the MultiPASS Suite. (→ MultiPASS Suite User’s Guide) What Happens When FAX/TEL AUTO SW is SelectedTelephone Fax FaxSending documentmanuallySending documentautomaticallyThe machine answers without ringing.The machine listens for the fax tone.(For 8 sec.)The fax toneis detected.The fax tone is not detected.The document isreceived automatically.The machine starts ringing. Pick up thehandset to talk.If you don’t pick up the handset(within 15 sec.).DEFAULT ACTIONChoose between:RECEIVE (Factory default setting) and DISCONNECT.DISCONNECTRECEIVE(Factory default setting)The fax tone isdetected and themachine switches toreceive mode.The machinedisconnects the call.Not all fax machines are capable of sending afax tone. For those cases if you set theDEFAULT ACTION to RECEIVE, the machineswitches to receive mode automatically andstarts receiving the document. If no documentcomes in, it disconnects the call afterapproximately 40 seconds.F/T RING TIME(Factory defaultsetting=15 sec.)Type of callTelephone chargesbegin for the caller.RING START TIME(Factory defaultsetting = 8 sec.)NOTE